Modelling pastes, texture gels and special effect gels for acrylic colours


Acrylic modelling paste, fine

for white/ even structures


An acrylic paste with a firm, very heavy consistency. Dries up to a white, semi-glossy, even surface with a slightly absorbent character. Ideal for structuring and modelling effects especially on rigid substrates, e.g. primed wood. The dried structures can be treated with very fine abrasive paper or a knife.

Thinner: Water




    • Stir – if necessary – before use.
    • Modelling paste, fine is ready for use and should be applied pure or mixed with acrylic colours with a pallet knife onto a greaseless painting ground. (Product has a brightened effect!)
    • If coats thicker than 1,0 cm are required, these should be built in stages.
    • The time for drying depends on the thickness of the surface and can last from several minutes up to several hours.
    • The dried structures can be treated with very fine abrasive paper or a knife. They can be overpainted with acrylic colours after getting completely dry.
    • The product can be diluted with water, but dries up water-insoluble.
    • Please clean tools as soon as possible with water or water and soap. Just dried acrylic colours can be removed with brush cleaner 50051 / 50052.
    • Please don´t use the product below temperatures under 10 °C object- and room-temperatures.
    • Close immediately after use.
    • Store in a cool and dry place.
    • Protect from frost.
    • Individual pre-tests are required.


                          Sizes: 300 ml and 1000 ml

                          Contains: pure acrylate dispersion, pigments, fillers, additives, water

                          Signal word: -

                          Hazard statements

                          Safety precautions

                          Other hazards
                          May produce an allergic reaction.