Back to:Final treatment

Finishing varnishes

 

Final-/picture varnish AEROSPRAY

synthetic resin varnish

50416

Final varnish for paintings in oil. Glossy; colourless; non-yellowing; age-resistant; fast drying.

 

 

Handling

    • Shake well before use.
    • Spray at room temperature by moving the can from one side to the other and from top to bottom and holding the can at a distance of 30 – 40 cm from the vertically positioned or slightly inclined and completely dry object. (Make the change in spray direction away from the picture!)
    • May only be applied to the layer of oil paint after it has dried completely, i.e. after 8 – 12 month at the earliest.
    • The dried varnish layer remains soluble in turpentine substitute 50019, oil of turpentine 50024 / 50102 or varnish remover 50060 over a long period.
    • The varnish coats normally used in practice give no special UV protection to the paints used! For this reason, we recommend that you use high-quality and lightfast oil paints from the outset as far as possible.
    • Any clogged-up spray heads are best cleaned using acetone.
    • Store in a cool and dry place.
    • Protect from sunlight and do not expose to temperatures exceeding 50°C (122°F).
    • Individual pre-tests are required.

                     

                    Sizes: 300 ml

                    Contains: dimethyl ether, acrylic resin, aldehyde resin, mineral spirit.

                    GHS Icon: Reizend GHS Icon: Flamme GHS Icon: Gesundheitsgefahr GHS Icon: Umwelt

                    Signal word: Danger

                    Hazard statements

                    Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye irritation. May cause respiratory irritation. May cause drowsiness or dizziness. May cause damage to organs through prolonged or repeated exposure. Toxic to aquatic life with long lasting effects.

                    Safety precautions

                    Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. In case of insufficient ventilation and/or through use, explosive/highly flammable mixtures may develop. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Do not breathe spray. Use only outdoors or in a well-ventilated area. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER if you feel unwell. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

                    Other hazards
                    Repeated exposure may cause skin dryness or cracking.